Ricoh C222DN - Aficio SP Color Laser Printer Software Manual page 83

Specifying the printer's IP address
Important
❒ To perform the following procedure, you must first return the printer's set-
tings to its factory-set defaults. To do this: first turn the printer's power switch
to off, wait a few seconds and then, while pressing down the {Job Reset} and
{Stop/Start} keys, turn the printer's power switch back to on and keep both
keys pressed down until the Alert and Ready indicators light up.
A
Connect the printer and computer using the USB cable, and then turn the
printer's power switch to on.
B
Start Smart Organizing Monitor from the [Applications] folder.
The [Printer Driver Selection] dialog box appears.
C
In the [Printer Driver Selection] dialog box, select this printer, and then click
[OK].
Smart Organizing Monitor appears.
D
On the [User Tools] tab, click [IP Address].
E
In [IP Address], enter the IP address you want to set for the printer.
The MAC address is displayed automatically.
Reference
p.85 "Using Smart Organizing Monitor"
Using TCP/IP
A
Connect the printer and the computer using the Ethernet cable.
B
Start [Printer Setup Utility].
C
Click [Add].
The [Printer Browser] dialog box appears.
D
Click [Default Browser].
E
In the list that appears, select this printer, and then click [Add].
Exit [Printer Setup Utility].
Specifying the Printer
75
8