Preparing for Printing
If Bidirectional Communication Is Disabled
Set up option settings when bidirectional communications are disabled.
1
Important
❒ Manage Printers permission is required to change the printer properties in
the [Printers] folder. Log on as an Administrators or Power Users group mem-
ber.
❒ Make sure that [Enable bidirectional support] is selected on the [Ports] tab in the
printer properties dialog box. Printing is possible only if this check box is se-
lected.
A
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
When using Windows XP, and Windows Server 2003/2003 R2, click [Printers
and Faxes] on the [Start] menu. The [Printers and Faxes] window appears.
When using Windows Vista, click [Control Panel] on the [Start] menu, and then
click [Printer]. The [Printer] window appears.
B
Click the icon of the printer you want to use.
C
On the [File] menu, click [Properties].
D
Click the [Accessories] tab.
If you are using the PostScript 3 printer driver, click the [Device Settings] tab.
E
Select options installed from the [Options] area, and then make the neces-
sary settings.
F
Select the total amount of the memory in [Total Memory:], when the optional
SDRAM module is added.
G
Under [Paper Size Settings], click and highlight the tray to be used, select the
appropriate size , and then click [Update].
H
Click [OK] to close the printer properties dialog box.
18