Other Print Operations; Form Feed; Performing Form Feed; Canceling A Print Job - Ricoh C222DN - Aficio SP Color Laser Printer Software Manual

3. Other Print Operations

Form Feed

Use the form feed function to continue printing when a problem such as a paper
size error occurred.
This function can be performed using the control panel.
Important
❒ The tray cannot be changed if the following function is set:
• Duplex Print to a tray that does not support duplex printing
• Cover Sheet
❒ If the paper that is loaded is larger than the paper size specified in the printer
driver, using the form feed function could result in a paper jam. Use form feed
only if the paper is the same as or smaller than the paper size specified in the
printer driver.
Note
❒ If form feed is selected for a tray with the following settings, you can change
the tray by canceling the settings:
• Duplex Print

Performing Form Feed

Follow the procedure below to perform form feed.
A
If the Smart Organizing Monitor dialog box with a caution message ap-
pears, press the {Stop/Start} button.
The printer prints using the selected tray.
Note
❒ If you want to print after adding paper to the tray, load the correct paper,
and then click the {Stop/Start} button.
❒ If a tray with a smaller paper size is selected, the print job may be cut short,
or other problems may occur.

Canceling a Print Job

Follow the procedure below to cancel a print job that is related to the printer er-
ror occurred.
A
If the Smart Organizing Monitor dialog box appears with a caution mes-
sage.
31