Replacing Front Brackets (Hp 9000, 10000 And 110000 Series Cabinets Only) - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Sliding Shelf Installation for HAFM Server
Replacing Front Brackets (HP 9000, 10000 and 110000 Series
Cabinets Only)
For the HP 9000, 10000 and 11000 series cabinets, you must remove the existing
front bracket and install a longer front bracket for the sliding tray to function
properly. Perform the following steps:
1. Remove the existing front brackets from the tray assembly:
Figure 37: Removing the front bracket
2. Attach long front brackets to the tray assembly:
80
a. Unscrew the captive fastener (1) from the front bracket (2), as shown in
Figure 37.
b. Remove the front bracket from the tray assembly by removing three
flat-head screws, as shown in
c. Repeat step step a
the tray assembly.
a. Attach a long front bracket (1) to the tray assembly using the three
flat-head screws, as shown in
b. Attach the captive fastener to the long front bracket (2).
Figure 37.
and step b to remove the bracket on the opposite side of
2
Figure 38.
HAFM Server for Windows 2000 Installation Guide
1