Configuring The Ftp Server Home Directory For Read/Write Access; Services Window - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Configuring the FTP Server Home Directory for Read/Write Access

To configure the FTP server home directory for read/write access, and to create a
new virtual directory for accessing the HAFM program files, complete the
following steps.
1. If it does not already exist, create the following directory:
2. Choose Start > Settings > Control Panel. The Control Panel window
3. Double-click Administrative Tools. The Administrative Tools window
4. Double-click Internet Service Manager. The Internet Information
5. Expand the tree in the Internet Information Services window to display the
6. Right-click Default FTP Site and choose Properties. The Default FTP Site
7. Click the Home Directory tab in the Default FTP Site Properties dialog
8. Ensure the Read and Write check boxes are selected, and then click OK.
9. From the Internet Information Services window, right-click Default FTP
10. Click Next in the Virtual Directory Creation Wizard.
HAFM Server for Windows 2000 Installation Guide
The FTP server home directory must have both read and write access
permissions. Because the default setting for the home directory is read-only,
complete the steps in
Read/Write Access" on page 23 to enable write permissions in the FTP server
home directory.
A virtual directory must be created to provide FTP read-only access to the
HAFM program files. Complete the steps in
Home Directory for Read/Write
directory.
c:\Program Files\HAFM
displays.
displays.
Services window displays.
following two items:
— Default FTP Site
— Default Web Site
Properties dialog box displays.
box.
Site and choose New > Virtual Directory. The Virtual Directory Creation
Wizard displays.
"Configuring the FTP Server Home Directory for
Access" on page 23 to create the virtual
HAFM Server Setup and Configuration
"Configuring the FTP Server
23