Configuring And Enabling E-Mail Event Notification - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

3. Select Maintenance > Configure Call Home Event Notification.
4. Place a check mark in the Enable Call Home Event Notification option.
To enable the call-home feature on individual Directors and Edge Switches,
perform the following for each Director and Edge Switch:
1. From the HAFM main window, double-click on the icon for the device.
2. On the menu bar, select Maintenance > Enable Call Home Notification.
3. Place a check mark in the Enable Call Home Event Notification option.
4. See

Configuring and Enabling E-Mail Event Notification

In addition to call-home functionality, notifications of many events can be sent via
e-mail. You can configure up to five e-mail addresses for administrators or others
who should be notified of significant product events.
The events that initiate e-mail event notification are specific to each managed
product. Some examples of events that initiate e-mail event notification are:
HAFM Server for Windows 2000 Installation Guide
The HAFM: Configure Call Home Event Notification dialog box displays,
as shown in Figure 29.
This enables the call home function for the HAFM server as well as for all
Directors and Edge Switches that have also been enabled for call-home
notification.
The Hardware View for the device is displayed.
"Testing Remote
call-home feature.
A change in system operational status.
Problem detection, such as a failed field-replaceable unit (FRU).
Problem correction.
A change in state that requires user attention or that requires a report to a
product administrator or service representative.
Notification" on page 61 for instructions on testing the
HAFM Server Setup and Configuration
59