4085-001
Paper Feed Platen Assembly Removal
1. Remove all covers.
2. Remove the carrier and belt. Refer to
Removal" on page
3. Remove the pump housing maintenance station, tank, and the
transport carrier motor. Refer to
Station/Ink Waste Tank/Transport Carrier Motor Removal" on
page
4-20.
4. Remove the star wheel shaft.
5. Press down gently on both sides and remove the paper feed
platen out through the front of the printer. Be careful not to
damage the platen bias studs.
6. Remove the paper feed platen.
4-38
Service Manual
4-14.
"Pump Housing/Maintenance
"Engine Board /Cover