4085-001
Operation
Factory Defaults
Hex Trace
JOB MENU
The following table lists the operations in the JOB MENU.
Operation
Reset Printer
SETUP MENU
The following table lists the menus and printer settings in the SETUP
MENU, and their corresponding values. The factory default value for
each setting is indicated by an asterisk.
Setting or Operation
Print timeout
Auto Continue
3-54
Service Manual
Value
See
"Restoring Factory Defaults" on page
=Restore
=Do Not Restore
No selections exist for this operation. Press Select
to initiate this operation. See
Debug Mode" on page
Value
Printer For information regarding this operation, see
"Job Menu" on page
Value
=Disabled
=1...255 (90*)
=Disabled*
=5...255
"Activating Hex Trace
3-19.
3-46.
3-12.