Lexmark J110 Service Manual page 115

4085-001
The content of the Print Test page varies depending on the media
installed in the selected input source. If a source is selected that
contains paper (that is, letter, legal, and so on), then a page similar
to the Quick Test page is printed. However, it does not contain the
Print Registration diamonds. If a source is selected which contains
envelopes, then an Envelope Print Test pattern is printed. This
pattern only contains text, which consists of continuous prints of
each character in the selected symbol set.
If Continuous is selected, all sources printing with paper sizes prints
the same page continuously until the test is stopped. If Continuous is
selected for a source which contains envelopes, then the envelope
print test pattern is printed on the first envelope and subsequent
envelopes are blank.
Note: The Print Test page can be printed on any paper or envelope
size. However, more than one sheet of some media sizes may be
required.
While the page is printing the following message is displayed. The
Power indicator also blinks while the page is printing.
<Input source>
Printing
If Single is selected, no buttons are active while the Print Test page
is printing. However, if Continuous is selected, Return or Stop can
be pressed to cancel the test. While the test is being canceled, the
following message is displayed.
<Input source>
canceling...
Note: <input source> represents the input source selected for the
Print Test. One of the following sources is displayed: Tray 1, Tray 2,
or MP Feeder.
Diagnostic Aids
3-21