Lexmark J110 Service Manual page 155

4085-001
Intermediate Menu, Setting or
Operation
Coarse Alignment
Enable PHCE Mode
Exit Config Menu
Value
No selections exist for this operation.
Press Select to initiate this operation.
See "Aligning the Printheads" on
page 3-5. After the alignment page is
printed, the user enters alignment values
for each of the sections of the alignment
page.
-
D
=
1...15 (8*)
-
E
=
1...27 (13*)
=
Disable*
=
Enable
No selections exist for this operation.
Press Select to exit the CON-FIG MENU
and restart the printer.
Diagnostic Aids
3-61