Operator Panel Button Functions - Lexmark J110 Service Manual

4085-001

Operator Panel Button Functions

Use the six operator panel buttons to open a menu, scroll through a
list of values, change printer settings, and respond to printer
messages. The following table describes the functions of each
button.
Note: Buttons act upon the information that appears on the second line of
the operator panel.
Button Function
Go Press the Go button.
This button is used to place the printer in the Ready state after an
off line situation. For instance, Go can be used to exit the menus,
and it can also be used to clear most Attendance messages.
Menu> Press Menu> to enter a menu group. The first menu in the menu
group is displayed.
Once a menu group is active, press Menu> to step to the next
selection.
To automatically increment a numerical printer setting, press and
hold Menu>. Release Menu> when the number you want is
displayed.
Menu< Press Menu< to enter a menu group. The last menu group is
displayed.
Once a menu group is active, press Menu< to step to the
previous selection.
To automatically decrement a numerical printer setting, press and
hold Menu<. Release Menu< when the number you want is
displayed.
Select Press the Select button.
Select the menu selection displayed on the second line of the
display. If a menu is displayed, such as Paper Menu, then Select
opens the menu and displays the first printer setting contained in
the menu.
If a menu item such as Paper Source is displayed, then Select
opens the item and displays the default setting.
If a menu item setting such as Tray 2 is displayed, then Select
saves the selection as the new default setting for Paper Source.
The printer displays the Saved message momentarily and then
returns to the menu item level.
General Information
1-5