Table of Contents
Advertisement
4044-XXX
Operator Panel Button Service Check
FRU
Models E310 & E312
Operator Panel
Operator Panel Cable
Paper Feed Service Check
Paper Jam error indication during POST
FRU
Models E310 & E312
Exit Sensor Flag
Models E310 & E312
Input Paper Feed Sensor
2-24
Service Manual
Action
Disconnect the operator panel from
the operator panel cable. Check the
continuity between U5-1 and U5-2
on the operator panel as you press
the operator panel button. As the
button is pressed, continuity is
present. Replace the operator panel
if continuity is not present. If
continuity is present, replace the
operator panel cable.
Action
If the exit sensor flag is not resting
within the paper exit sensor during
POST, the printer displays a paper
jam message. Make sure the flag is
operating freely and correctly
installed.
Make sure the input paperfeed
sensor is working properly. A stuck
or incorrectly installed sensor
causes this error.
Advertisement
Table of Contents
