Table of Contents
Advertisement
Additional Features
Disable/Enable Iridium Transceiver
Iridium telephone and data communications may be turned on or off by performing
these simple steps.
Disabling/enabling telephone and low speed data services:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select REPORTS/DATA LINK.
3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is
now displayed.
4) Press the MENU Key. The Page Menu window is now displayed.
5) Turn the FMS Knob to select 'Disable Iridium Transmission' in the menu list.
6) Press the ENT Key. The Iridium transceiver is now disabled.
7) To enable the Iridium transceiver, repeat steps 1 through 4, then select
'Enable Iridium Transceiver'.
Telephone Communication
The pilot or copilot can place and answer calls on the Iridium satellite network.
Control and monitoring of telephone functions are accomplished through the AUX-
TELEPHONE Page.
To view the Telephone Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX-TELEPHONE Page.
Internal
External
Phone
Phone
60
Garmin G1000H
Phone is Idle
Phone is ringing
Phone has a dial tone (off hook) or connected to another
phone
Cockpit Reference Guide for the Bell 407GX
™
Description
190-01254-00 Rev. A
Advertisement
Table of Contents
