Table of Contents
Advertisement
Appendix
BACK
DCLTR
SHW CHRT
CHKLIST
LOADING UPDATED DATABASES
CAUTION: Never disconnect power to the system when loading a database.
Power interuption during the database loading process could result in main-
tenance being required to reboot the system.
In some cases it may be necessary to obtain an unlock code from Garmin in order
to make the database product functional. It may also be necessary to have the system
configured by a Garmin authorized service facility in order to use some database
features.
If an error occurs during synchronization, an error message will be displayed,
followed by the affected display in the Sync Status section of the Database Window. If
synchronization completes on one display, but an error occurs on another, the error
message will be displayed with the affected diaplays listed after it. When an error
message is displayed, the problem must be corrected before synchronization can be
completed. A power cycle is required to restart synchronization when 'Card Full' or
'Err' is shown.
Error Message
Canceled
Card Full
112
Garmin G1000H
Database synchronization has been canceled by removing the bottom
SD card in display being updated
SD card does not contain sufficient memory
Cockpit Reference Guide for the Bell 407GX
™
Returns to top-level softkeys
Selects desired amount of map detail;
cycles through declutter levels:
DCLTR (No Declutter): All map
features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA
data
DCLTR-3: Removes everything except
the active flight plan
When available, displays optional
airport and terminal procedure charts
When available, displays optional
checklists
Description
190-01254-00 Rev. A
Advertisement
Table of Contents
