Create A User Waypoint Defined By Latitude & Longitude - Garmin G1000H Cockpit Reference Manual

Integrated flight deck cockpit reference guide for the bell 407gx
Hide thumbs Also See for G1000H:
Table of Contents

Advertisement

6) Enter the departure time. Press the ENT Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7) The flashing cursor moves to the ground speed (GS) field. Enter the ground
speed. Press the ENT Key when finished. Note that in 'automatic' page
mode, ground speed is provided by the system.
8) The flashing cursor moves to the fuel flow field. Enter the fuel flow. Press
the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel flow
is provided by the system.
9) The flashing cursor moves to the fuel onboard field. Enter the fuel onboard.
Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel
onboard is provided by the fuel totalizer.
10) The flashing cursor moves to the calibrated airspeed (CALIBRATED AS) field.
Enter the calibrated airspeed. Press the ENT Key when finished. Note that
in 'AUTOMATIC' page mode, calibrated airspeed is provided by the system.
11) The flashing cursor moves to the altitude (IND ALTITUDE) field. Enter the
altitude. Press the ENT Key when finished. Note that in 'AUTOMATIC' page
mode, altitude is provided by the system.
12) The flashing cursor moves to the barometric setting (PRESSURE) field. Enter
the desired baro setting. Press the ENT Key when finished. Note that in
'AUTOMATIC' page mode, the baro setting is provided by the setting entered
on the PFD.
13) The flashing cursor moves to the air temperature (TOTAL AIR TEMP) field. Enter
the desired air temperature. Press the ENT Key when finished. Note that in
'AUTOMATIC' page mode, air temperature is provided by the system outside
air temperature.
CREATE A USER WAYPOINT DEFINED BY LATITUDE & LONGITUDE
1) Turn the large FMS Knob on the MFD to select the 'WPT' page group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
190-01254-00 Rev. A
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
Flight Planning
29

Advertisement

Table of Contents
loading

Table of Contents