Table of Contents
Advertisement
Reply to a Text Message
While viewing the text message, press the REPLY Softkey.
Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Reply To Message'.
c) Press the ENT Key.
Sending a Text Message
1) While viewing the AUX-TEXT MESSAGING Page, press the NEW Softkey.
Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Draft New Message'.
c) Press the ENT Key.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the
'TO' field. Enter the desired telephone number or email address. Entry can
be accomplished through the alphanumeric keys on the MFD Controller, or
combination of the FMS Knob on the controller and softkeys on the MFD.
The FMS Knob is used to enter letters and numbers, or numbers can be
entered from the MFD by pressing the NUMBERS Softkey. Press the CAP
LOCK Softkey to create upper and lower case alpha characters. Special
characters can be accessed by pressing the SYMBOLS Softkey.
3) Press the ENT Key. The cursor is now displayed in the 'MESSAGE' field.
4) Enter the desired message using any combination of entry methods as
described in step 2.
5) Press the ENT Key.
6) Press the SEND Softkey to send the message immediately, or press the
SAVE Softkey to save the message in Outbox for sending at a later time.
Press the CANCEL Softkey to delete the message.
Predefined Text Messages
Time and effort can be saved in typing text messages that are used repeatedly by
saving these messages as a predefined message.
190-01254-00 Rev. A
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
™
Additional Features
65
Advertisement
Table of Contents
