Garmin G1000H Cockpit Reference Manual page 47

waypoint name highlighted, use the FMS Knobs to enter the desired
waypoint name. Waypoints may also be selected as follows:
a) When a flight plan is active, turning the small FMS Knob to the left will
display a list of the flight plan waypoints.
b) Turn the large FMS Knob to select the desired waypoint.
c) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airports to
the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'USER' waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
11) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field. Enter
the desired radial from the reference waypoint.
12) Press the ENT Key.
13) Repeat step 10 to enter the next waypoint name.
14) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field for the
190-01254-00 Rev. A Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Flight Planning
31