Configuring VCO alerting altitudes:
1) Turn the large FMS knob to select the AUX - System Setup Page.
2) If the Aux - System Setup 2 Page is not already displayed, press the SETUP
2 Softkey.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight the altitude shown in the MAX
SELECTED field.
5) Turn the small FMS Knob to select the maximum altitude at which VCO
alerts will be enabled from (from 50 to 500 feet), or select NONE to disable
all VCO alerts.
6) When finished, press the FMS Knob.
190-01254-00 Rev. A
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
™
Hazard Avoidance
53