Create A User Waypoint Defined By Radials From Other Waypoints - Garmin G1000H Cockpit Reference Manual

Flight Planning
6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off). If the waypoint is to remain in the system, proceed to step 7.
a) Turn the large FMS Knob one click to the left to highlight
'TEMPORARY'.
b) Press the ENT Key to place a check-mark in the box. Turn the large
FMS Knob to place the cursor back in the 'WAYPOINT TYPE' field.
7) With the cursor in the 'WAYPOINT TYPE' field, turn the small FMS Knob to
display a list of waypoint types.
8) Turn the small FMS Knob to select LAT/LON (latitude and longitude).
9) Press the ENT Key.

CREATE A USER WAYPOINT DEFINED BY RADIALS FROM OTHER WAYPOINTS

1) Turn the large FMS Knob on the MFD to select the 'WPT' page group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off). If the waypoint is to remain in the system, proceed to step 7.
a) Turn the large FMS Knob one click to the left to highlight
'TEMPORARY'.
b) Press the ENT Key to place a check-mark in the box. Turn the large
FMS Knob to place the cursor back in the 'WAYPOINT TYPE' field.
7) With the cursor in the 'WAYPOINT TYPE' field, turn the small FMS Knob to
display a list of waypoint types.
8) Turn the small FMS Knob to select RAD/RAD (radial/radial).
9) Press the ENT Key.
10) The cursor moves to the 'REFERENCE WAYPOINTS' field. With the first
30
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. A