Teac HS-2 Technical Information page 6

List of vender commands
A list of vender commands (Command 7F / FF) is given below.
Command codes are a combination of command (2 bytes), category code (2 bytes) and sub command (2
bytes). For detailed information, see page 24 and following.
Control/Sense Command
7F01 DEVICE SELECT
7F0223 DIRECT FOLDER SEARCH PRESET
7F0255 FOLDER No STATUS SENSE
7F0259 FOLDER NAME SENSE
7F025A PROJECT NAME SENSE
7F025D TOTAL FOLDER No SENSE
7F025E TOTAL PROJECT No SENSE
7F031A MARK SKIP
7F0323 DIRECT MARK SKIP PRESET
7F0355 MARK No. STATUS SENSE
7F0358 MARK TIME SENSE
7F035D TOTAL MARK No SENSE
7F0400 FLASH PAGE SELECT
7F041A FLASH PAGE SKIP
7F0457 CURRENT SLOT INFORMATION SENSE
7F045D FLASH READY SLOT SENSE
7F0511 ONLINE
TASCAM HS-8 RS-232C Protocol Specification
Return Command
FF01 DEVICE SELECT RETURN
FF02D5 FOLDER No RETURN
FF02D9 FOLDER NAME RETURN
FF02DA PROJECT NAME RETURN
FF02DD TOTAL FOLDER No RETURN
FF02DE TOTAL PROJECT No RETURN
FF03D5 MARK No. RETURN
FF03D8 MARK TIME RETURN
FF03DD TOTAL MARK No RETURN
FF0480 FLASH PAGE RETURN
7F04D7 CURRENT SLOT INFORMATION RETURN
FF04DD FLASH TRACK RETURN
FF04F6 CHANGE FLASH PAGE
FF0591 ONLINE RETURN
6 TEAC Corporation