Teac HS-2 Technical Information page 26

PROJECT NAME SENSE
Requests that the name of specified project be returned.
Command 7F
Category Code 02
Sub Command 5A
Machine ID 0
Data 4 bytes
Data 5
Data 6
Data 7
Data 8
・ If a project number not existing in the media is specified, the connected device will transmit ILLEGAL [F2].
Return PROJECT NAME RETURN [FF02DA]
TOTAL FOLDER No. SENSE
Requests that the total number of folders in the specified project be returned.
Data 5 to 8 (project number) can be omitted. If they are omitted, the number of folders within the current project
will be called for.
Command 7F
Category Code 02
Sub Command 5D
Machine ID 0
Data none or 4 bytes
[If the data length is 4 bytes, the following data will be added.]
Data 5
Data 6
Data 7
Data 8
Return TOTAL FOLDER No. RETURN [FF02DD]
TOTAL PROJECT No. SENSE
Requests that the total number of projects on the current media be returned.
Command 7F
Category Code 02
Sub Command 5E
Machine ID 0
Data none
Return TOTAL PROJECT No. RETURN [FF02DE]
MARK SKIP
Causes the controlled device to skip marks.
After skipping, the device will maintain the mode in which it was when the operation began.
Command 7F
Category Code 03
Sub Command 1A
Machine ID 0
Parameter 2 bytes
Data 5 Data 6
0 0
0 1
・ If data other than the above is received, the connected device will transmit ILLEGAL [F2].
Return none
Description
Tens digit of the project number
Ones digit of the project number
Thousands digit of the project number
Hundreds digit of the project number
Description
Tens digit of the project number
Ones digit of the project number
Thousands digit of the project number
Hundreds digit of the project number
Description
Mark Skip Next
Mark Skip Previous
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Project number
Example) 5400: project 54
Remarks
Project number
Example) 2301: project 123
Remarks
Moves to the next mark.
Moves to the previous mark
26 TEAC Corporation