Advertisement
Detailed information about Vender Commands
Vender commands for the HS-8 have the following format.
Byte 1
Byte 2
Byte 3
LF
ID
Command
LF
'0'
'7F' or 'FF'
Category Code:
category code (2-byte ASCII) used for classifying vender commands according to function
Sub Command:
unique sub-command code (2-byte ASCII) within the category
DEVICE SELECT (01) is the only category has no sub command. Data 3 and data that follow
are parameters for that command.
Parameter:
parameter added to a command code (ASCII, length differs from sub command to sub
command.)
Below is the list of category codes.
Category Code
Category classification
01
DEVICE SELECT
02
FOLDER/PROJECT SELECT
03
MARK
04
FLASH START
05
ONLINE
Byte 4
Byte 5
Byte 6
Data 1
Data 2
Category Code
Selects the device to be used (Slot 1 / 2)
Performs an operation relating to a folder or project
Performs an operation relating to a mark
Performs an operation relating to flash start
Selects Online mode
23
TASCAM HS-8 RS-232C Protocol Specification
Byte 7
Byte 8
Byte 9
Data 3
Data 4
Data 5
Sub Command
Parameter
Description
...
Byte n
...
CR
...
CR
TEAC Corporation
Advertisement
