Teac HS-2 Technical Information page 25

PROJECT SELECT
Changes the current project to another project by specifying a project number.
Command 7F
Category Code 02
Sub Command 23
Machine ID 0
Data 8 bytes
Data 5
Data 6
Data 7
Data 8
Data 9
Data 10
Data 11
Data 12
・ If a project number not existing in the media is specified, the connected device will transmit ILLEGAL [F2].
・ If the current project number is specified for the project number, the connected device will transmit
ILLEGAL [F2].
Return none
FOLDER No. STATUS SENSE
Requests that the current folder number be returned.
Command 7F
Category Code 02
Sub Command 55
Machine ID 0
Data none
Return FOLDER No. RETURN [FF02D5]
FOLDER NAME SENSE
Requests that the name of specified folder be returned.
Data 9 to 12 (project number) can be omitted. If they are omitted, the name of the specified folder within the
current project will be called for.
Command 7F
Category Code 02
Sub Command 59
Machine ID 0
Data 4 bytes or 8 bytes
Data 5
Data 6
Data 7
Data 8
[If the data length is 8 bytes, the following data will be added.]
Data 9
Data 10
Data 11
Data 12
・ If a folder number not existing in the project is specified, the connected device will transmit ILLEGAL [F2].
Return FOLDER NAME RETURN [FF02D9]
Description
0000
Tens digit of project number
Ones digit of the project number
Thousands digit of the project number
Hundreds digit of the project number
Description
Tens digit of the folder number
Ones digit of the folder number
Thousands digit of the folder number
Hundreds digit of the folder number
Description
Tens digit of the project number
Ones digit of the project number
Thousands digit of the project number
Hundreds digit of the project number
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Specify the fixed value "0000" for PROJECT
SELECT.
Project number
Example) 5400: project 54
Remarks
Folder number
Example) 2301: folder 123
Remarks
Project number
Example) 5400: project 54
25 TEAC Corporation