Teac HS-2 Technical Information page 14

REMOTE/LOCAL SELECT
Enables or disables operation on the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 4C
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return REMOTE/LOCAL SELECT RETURN [CC]
PLAY MODE SELECT
Sets Play mode for the controlled device.
To check the Play mode setting, use the command "PLAY MODE SENSE [4E]."
Command 4D
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return none
PLAY MODE SENSE
Requests that Play mode of the controlled device be returned.
Command 4E
Machine ID 0
Data none
Return PLAY MODE RETURN [CE]
MECHA STATUS SENSE
Requests that the operation status of the controlled device be returned.
Command 50
Machine ID 0
Data none
Return MECHA STATSU RETURN [D0]
TRACK (TAKE) No. STATUS SENSE
Requests that the current take number be returned.
Command 55
Machine ID 0
Data none
Return TRACK (TAKE) No. STATUS RETURN [D5]
CURRENT TRACK (TAKE) INFORMATION SENSE
Requests that the information about the current take be returned.
Command 57
Machine ID 0
Data none
Return CURRENT TRACK (TAKE) INFORMATION RETURN [D7]
Description Remarks
Remote Only remote operation via CONTROL I/O (RS-232C, RS-422, PARALLEL)
will be enabled. Key operations on the device's panel will be disabled.
Local Remote operation, and key operation on the device's panel will be enabled.
Sense Requests that the current setting be returned.
Description Remarks
All Take Plays all takes in the current folder
One Take Plays the current take only
TASCAM HS-8 RS-232C Protocol Specification
14 TEAC Corporation