Teac HS-2 Technical Information page 18

AUTO READY SELECT RETURN
This is the return command in response to the command "AUTO READY SELECT [36]."
It returns the On/Off status of the auto-ready function.
Command B6
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
Request/Preset AUTO READY SELECT [36]
REPEAT SELECT RETURN
This is the return command in response to the command "REPEAT SELECT [37]."
It returns the On/Off status of the repeat playback.
Command B7
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
Request/Preset REPEAT SELECT [37]
INCR PLAY SELECT RETURN
This is the return command in response to the command "INCR PLAY SELECT [3A]."
It returns the On/Off status of the incremental play function.
Command BA
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
Request/Preset INCR PLAY SELECT [3A]
REMOTE/LOCAL SELECT RETURN
This is the return command in response to the command "REMOTE/LOCAL SELECT [4C]."
It returns the enabled or disabled status for key operation on the device's panel.
Command CC
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
Request/Preset REMOTE/LOCAL SELECT [4C]
Description Remarks
Auto Ready Off
Auto Ready On
Description Remarks
Repeat Off
Repeat On
Description Remarks
INCR Play Off
INCR Play On
Description Remarks
Remote Only remote operation via CONTROL I/O (RS-232C, RS-422,
PARALLEL) will be enabled. Key operation on the device's panel
will be enabled.
Local Remote operation, and key operation on the device's panel will be
enabled.
TASCAM HS-8 RS-232C Protocol Specification
18 TEAC Corporation