Teac HS-2 Technical Information page 13

AUTO CUE SELECT
Turns on or off the Auto Cue function of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Auto Cue Level setting is made using the command "AUTO CUE LEVEL PRESET [20]."
Command 30
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return AUTO CUE SELECT RETURN [B0]
AUTO READY SELECT
Turns on or off the Auto Ready function of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 36
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return AUTO READY SELECT RETURN [B6]
REPEAT SELECT
Turns on or off the Repeat Playback of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 37
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return REPEAT SELECT RETURN [B7]
INCR PLAY SELECT
Turns on or off the Incremental Play function of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 3A
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return INCR PLAY SELECT RETURN [BA]
Description Remarks
Auto Cue Off
Auto Cue On
Sense Requests that the current setting be returned.
Description Remarks
Auto Ready Off
Auto Ready On
Sense Requests that the current setting be returned.
Description Remarks
Repeat Off
Repeat On
Sense Requests that the current setting be returned.
Description Remarks
INCR Play Off
INCR Play On
Sense Requests that the current setting be returned.
TASCAM HS-8 RS-232C Protocol Specification
13 TEAC Corporation