Teac HS-2 Technical Information page 10

TRACK (TAKE) SKIP
Causes the controlled device to skip takes.
After skipping, the device will maintain the state in which it was right before the operation was performed.
Command 1A
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return none
CALL
Locates the controlled device to the call point and places the device into play-ready state.
Command 1D
Machine ID 0
Data none
Return none
AUTO CUE LEVEL PRESET
Sets the Auto Cue Level of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Auto Cue function is turned on or off using the command "AUTO CUE SELECT [30]."
Command 20
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
0 2
0 3
0 4
0 5
0 6
0 7
0 8
F F
・ If data other than the above is received, the HS-8 will transmit ILLEGAL [F2].
Return AUTO CUE LEVEL RETURN [A0]
Description
Track (Take) Skip Next
Track (Take) Skip Previous
Description Remarks
Preset –24dB
Preset –30dB
Preset –36dB
Preset –42dB
Preset –48dB
Preset –54dB
Preset –60dB
Preset –66dB
Preset –72dB
Sense Requests that the current preset level be returned.
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Skips to the next take.
If the current position is at the beginning of a take,
skips to the beginning of the previous take. If the
current position is not at the beginning of a take, skips
to the beginning of the current take.
10 TEAC Corporation