Advertisement
DIRECT TRACK (TAKE) SEARCH PRESET
Makes a direct search for the specified take number.
The operation of the controlled device after a direct search depends on the data format (data length) of this
command.
[4-byte data length]
If the controlled device is in Stop or Play mode when this command is received, it will enter Play mode after a
direct search. If the controlled device is in any other mode, it will remain in that mode even after a direct search.
[6-byte data length]
The operation of the controlled device after a direct search is determined by Data 5 and 6 specified.
Command
23
Machine ID
0
Data
4 bytes or 6 bytes
Data 1
Data 2
Data 3
Data 4
[If the data length is 6 bytes, the following data will be added for operation-specified code.]
Data 5
Data 6
1
0
1
2
1
4
・ If the specified take number does not exist in the current folder, the HS-8 will transmit ILLEGAL [F2].
・ If an operation-specified code that is not in the table above is specified, the HS-8 will transmit ILLEGAL
[F2].
Return
none
CLOCK DATA PRESET
Sets the date and time of the controlled device.
A return command is returned only if Sense [FF] is specified for Data 1 and Data2.
Command
27
Machine ID
0
Data
10 bytes or 2 bytes
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
Data 8
Data 9
Data 10
・ If a date or time outside the possible range is set, the HS-8 will transmit ILLEGAL [F2].
Return
CLOCK DATA PRESET RETURN [A7]
Description
Tens digit of the take number
Ones digit of the take number
Thousands digit of the take number
Hundreds digit of the take number
Operation
Remarks
STOP
PLAY
PAUSE
Description
Tens digit of year
Ones digit of year
Tens digit of month
Ones digit of month
Tens digit of day
Ones digit of day
Tens digit of hours
Ones digit of hours
Tens digit of minutes
Ones digit of minutes
TASCAM HS-8 RS-232C Protocol Specification
Remarks
Take number
Example) 2301: take 123
Remarks
Example) 0802231234 means February 23
34 minutes past twelve o'clock.
11
rd
of year 2008 at
TEAC Corporation
Advertisement
