Cisco PIX 520 - PIX Firewall 520 Online Help Manual page 18

File>Write Configuration to TFTP Server
The Write Configuration to TFTP Server panel lets you write the current running configuration to a Trivial
File Transfer Protocol
The following sections are included in this Help topic:
Important Notes
Field Descriptions
Defining a TFTP Server and Configuration File Name
Important Notes
If you have already set up a TFTP server in
select the Click here to use the existing TFTP server Configuration on PIX, then Apply to PIX to have the
configuration written to a TFTP server immediately. If not, follow the steps listed in
and Configuration File
Field Descriptions
This panel displays the following fields.
Click here to use the existing TFTP server Configuration on PIX—If you have already set up a TFTP
server in System Properties>PIX Administration>TFTP
Interface Name—The interface on which your TFTP server resides. This information reflects what is
configured in System Properties>PIX Administration>TFTP Server. If Click here to use the existing
TFTP server Configuration on PIX is not selected, the default interface is inside.
TFTP Server IP Address—Enter the IP address of the TFTP server.
Configuration File Name—Enter the path and filename of the configuration file to be saved on your
TFTP Server.
Apply to PIX—Sends changes made in PDM to the PIX Firewall unit and applies them to the running
configuration.
Cancel—Discards changes and returns to the previous panel. .
Defining a TFTP Server and Configuration File Name
1. Follow these steps to define a TFTP server and Configuration File Name.
2. If you have already set up a TFTP server in System Properties>PIX Administration>TFTP Server, you
(TFTP) server.
System Properties > PIX Administration > TFTP
Name.
Defining a TFTP Server
Server, this box will be selected by default.
Server, you can