Cisco PIX 520 - PIX Firewall 520 Online Help Manual page 57

nameif Assign a name to an interface
names Enable, disable or display IP address to name conversion
nat Associate a network with a pool of global IP addresses
outbound Create an outbound access list
pager Control page length for pagination
passwd Change Telnet console access password
pdm Configure Pix Device Manager
ping Test connectivity from specified interface to <ip>
quit Disable, end configuration or logout
reload Halt and reload system
rip Broadcast default route or passive RIP
route Enter a static route for an interface
session Access an internal AccessPro router console
setup Pre-configure PIX
shun Manages the filtering of packets from undesired hosts
snmp-server Provide SNMP and event information
sysopt Set system functional option
static Map a higher security level host address to global address
telnet Add telnet access to PIX console and set idle timeout
ssh Add SSH access to PIX console, set idle timeout, display list of active SSH sessions &
terminate a SSH session
terminal Set terminal line parameters
tftp-server Specify default TFTP server address and directory
timeout Set the maximum idle times
url-cache Enable URL caching
url-server Specify a URL filter server
virtual Set address for authentication virtual servers
who Show active administration sessions on PIX
write Write config to net, flash, floppy, or terminal, or erase flash
Copyright © 2001 Cisco Systems, Inc.