Cisco PIX 520 - PIX Firewall 520 Online Help Manual page 190

Delete—Deletes the selected item.
Apply to PIX—Sends changes made in PDM to the PIX Firewall unit and applies them to the running
configuration. Use the
failover standby PIX Firewall unit. See
Reset—Discards changes and reverts the panel to the information displayed when it was opened or the last
time Refresh was clicked while open.
Adding an AAA Server
Follow these steps to add an AAA Server:
1. Click Add. The Add AAA Server dialog box appears.
2. Enter the desired server group, interface name, IP address, key, and timeout value for the new server.
3. Click OK to add the server.
4. Click Apply to PIX.
Editing an AAA Server
Follow these steps to edit an AAA Server:
1. In the AAA Servers panel, select the server you want to edit from the AAA Servers table.
2. Click Edit. The Edit AAA Server dialog box appears.
3. Make the desired changes to the selected server.
4. Click OK to modify the server.
5. Click Apply to PIX.
Deleting an AAA Server
Follow these steps to delete an AAA Server:
1. In the AAA Servers panel, select the server you want to delete int the AAA Servers table.
2. Click Delete. The server is deleted. Note that you cannot delete the last remaining server in a defined
server group.
3. Click Apply to PIX.
Resetting to Last Applied Settings
Reset—Discards changes and reverts the panel to the information displayed when it was opened or the last time
Refresh was clicked while open.
File menu to write a copy the running configuration to Flash, a
Notes on Applying Configuration Changes.
Copyright © 2001 Cisco Systems, Inc.
TFTP server, or a