C
W
P
O
OLOR
ISE
RINT
•
is a complete and accurate simulation method based on colorimetric
Full (Output GCR)
transformations. Hues are preserved, even for primary colors. With this method, the
Gray Component Replacement (GCR) level that was specified in the original document
is not preserved. Instead, all CMYK data is reseparated using the GCR level specified
by the output profile. This simulation technique is similar to traditional ICC color
matching methods and is more appropriate than Full (Source GCR) for full color
printing designed for the press, but reproduced on your copier/printer.
When you specify Pure Black On for Black Text/Graphics and Full (Output GCR)
N
:
OTE
for CMYK Simulation Method, the black text and graphics in your document are printed
with 100% black-only toner.
Combine Separations
The Combine Separations setting specifies how to print separated CMYK data. It
supports: Cyan, Magenta, Yellow, Black, and one or more spot colors.
•
prints each separation individually.
Off
•
combines separations as a single, composite-color document, and automatically
On
makes the settings for the following print options: Color Mode (CMYK), Black Text/
Graphics (Normal), Black Overprint (Off), and Spot Color Matching (Off).
The results of combining the multiple plates are predictable and accurate, regardless of the
original application used. This feature also fully supports DCS 2.0 file formats when
included in a PostScript print job from a page layout application.
PTIONS
89