Oki CX3641MFP Technical Reference page 27

C W
OLOR ISE
Installing Device Link Profiles
If you are an administrator, you can download Device Link Profiles to the CX3641MFP
using Profile Manager. You must associate a Device Link Profile with the following
settings:
• An RGB Source Profile or a CMYK Simulation Profile setting and
• An Output Profile setting
The Device Link Profile is enabled when these two settings are selected.
You can enable a Device Link Profile in three locations:
• In ColorWise Pro Tools Color Setup, select the default settings for RGB Source Profile,
CMYK Simulation Profile, and Output Profile. These settings apply to all jobs unless
overridden for a particular job.
• Use Expert Color Settings in the CX3641MFP printer drivers to select the settings for
RGB Source Profile, CMYK Simulation Profile, and Output Profile when you print a
job.
• Use Command WorkStation Job Properties to override the settings for RGB Source
Profile, CMYK Simulation Profile, and Output Profile for a specific job.
For more information about enabling Device Link Profiles using Color Setup, see
For more information about enabling Device Link Profiles using Expert Color Settings in
the CX3641MFP printer driver see
T D
O DOWNLOAD EVICE
1 In Profile Manager, if you do not see the Device Link Profile in the Description list, select the
folder that contains the Device Link Profile by clicking Browse in the upper-left corner.
2 Click OK to add the folder contents to the Description list.
The Device Link Profile is added to the Description list.
P T
RO OOLS
page 99.
L
INK PROFILES USING PROFILE MANAGER
27
page 31.