Oki CX3641MFP Technical Reference page 26

C W
OLOR ISE
Setting the default profiles
Use Profile Manager to set a default RGB source profile, simulation profile, or output
profile. The default RGB source and simulation profiles that you set are applied to all print
jobs sent to the CX3641MFP, unless you override them using print options. The same is
true of the default output profile that you set, unless you select the Use Media Defined
Profile option.
The Use Media Defined Profile option indicates whether or not to automatically apply the
output profile associated with the media type used in a print job. For more information,
see the following section.
Using media-defined output profiles
Instead of having Profile Manager apply a default output profile to all your print jobs, you
can keep the Use Media Defined Profile option selected. This option automatically applies
the output profile predefined for the media type in your print job. If your job contains
mixed media, this option can apply different output profiles predefined for the different
media.
T -
O USE MEDIA DEFINED OUTPUT PROFILES
1 Start ColorWise Pro Tools and click Profile Manager.
2 Select Use Media Defined Profile in the Output bar of Profile Manager.
Changing the setting for the Use Media Defined Profile option in Profile Manager
automatically changes the same setting in Color Setup. For more information, see
"Using Color Setup"
About Device Link Profiles
The CX3641MFP supports the use of Device Link Profiles. A Device Link Profile
describes the conversion from one color space to another. Device Link Profiles are
restrictive because they define the complete conversion from a source device to a
destination device. When you print using a Device Link Profile, you do not choose a
source profile or an output profile because the Device Link Profile specifies both.
ColorWise supports two kinds of Device Link Profiles: RGB source to CMYK destination
and CMYK source to CMYK destination.
A Device Link Profile bypasses most ColorWise color management because the
information needed to convert from the source to destination is fully contained in a Device
Link Profile.
To create a Device Link Profile, use profile-generating software such as EFI Color Profiler
Suite.
Depending on your job's workflow, you may not need to use Device Link Profiles.
N :
OTE
P T
RO OOLS
on page 30.
26