Oki CX3641MFP Technical Reference page 23

C W P
OLOR ISE RO
6 If the output profile contains no edit points, continue to
edit points from a previous AutoGray session, choose Refine or New.
reuses edits points from a previous session in an attempt to make them more
Refine
accurate. Refine is optional; use it only if the gray balance in your test document still
needs improvements after the first AutoGray session. If two Refine applications cannot fix
the situation, it is probably because your test document is not correctly addressing the
output profile, or because the output profile that you are editing does not adequately
describe the actual copier/printer and printing conditions. Applying Refine more than
twice is not recommended.
starts a new AutoGray session by first removing all edit points from a previous
New
session. New is recommended when you have performed more than two Refine
applications.
7 If the output profile contains edit points that were entered by a user, choose Proceed to remove
the points and continue with the AutoGray adjustment.
Proceed starts a fresh AutoGray session by first removing all user edit points. This is
because AutoGray cannot modify user-entered points.
T
OOLS
step 8. If the output profile contains
23