Oki CX3641MFP Technical Reference page 24

C W P
OLOR ISE RO
8 In the Print Options dialog box that appears, choose the Input Tray to use for the
measurement page and click Print.
The Page Type is automatically set to AutoGray Measurement Page.
The Paper Size is automatically set to LTR/A4.
9 Retrieve the measurement page from the copier/printer.
10 Follow the directions in the dialog box for placing the Kodak Gray Scale strip and the
AutoGray measurement page on the copier/printer glass, and click Continue.
Messages display the progress of the gray balance adjustment.
11 When the adjustment is complete, click OK.
Color Editor displays the adjusted output profile curve. New edit points have been inserted
by AutoGray to modify the gray balance, in much the same way an expert user would have
done manually.
12 To make edits to the output profile curve, click AutoGray again.
13 Choose Refine to fine-tune the curve, or New to acquire a new curve for editing.
For more information about these steps, see
14 To accept the AutoGray adjustment and save the results as a new profile, click Save.
15 Click Done to close Color Editor.
T
OOLS
page 23.
24