Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual page 59

4
Select [TYPE 1] or [TYPE 2] and press the SET
button.
Recording method
Use clip metadata TYPE 1
TYPE 2
Do not use clip meta TYPE 1
data *
TYPE 2
* The metadata upload file has been read, but [META
DATA] – [RECORD] is set to [OFF]
5
Press the MENU button to end processing.
USER CLIP NAME to be
recorded
Read metadata settings
Read metadata settings
+ COUNT value
Same as GLOBAL CLIP
ID
Same as CLIP NAME
COUNT Value
The count value is indicated as a four-digit number. When
recording method "TYPE 2" is selected for the USER CLIP
NAME in the clip metadata that is loaded, the COUNT value is
incremented by 1 for each new recording and a new clip is
generated.
■ To reset the COUNT value
Use the following procedure to reset the COUNT value.
1.
Open the thumbnail screen.
2.
Press the MENU button.
3.
Use the cursor buttons to choose [META DATA] –
[PROPERTY] – [USER CLIP NAME] and press the
SET button.
4.
Use the cursor buttons to select [COUNT RESET]
and press the SET button.
The COUNT value is reset to 1.
5.
Press the MENU or EXIT button to end processing.
Clip Management: Attaching Metadata to Clips
59