Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
155
AUTO REC
160
REPEAT PLAY
180
BATTERY SEL
181
TYPE-A NEAR
182
TYPE-A END
183
TYPE-B NEAR
126
Setup: Item Settings
Setting
FR
SUPER
No.
DISP.
0000
OFF
Select whether recording and stopping should be performed automatically according to
the Recording Marks in the HD SDI input signals from Panasonic camera-recorders.
0001
TYPE1
0: No automatic recording/stopping
0002
TYPE2
1: Recording and stopping is performed automatically according to the Recording Marks
in the LTC information attached to HD SDI signals.
2: Recording and stopping is performed automatically according to the Recording Marks
in the SVITC information attached to HD SDI signals.
NOTE:
• Set the CONTROL switch to REMOTE. Refer to "Panasonic camera-recorders,
recording formats and Recording Mark" on the next page before selecting TYPE1 or
TYPE2.
• Select TYPE1 or TYPE2. To start automatic recording, simultaneously press the REC
button and the STILL button to place this unit in the REC PAUSE mode. This function
will not work in any mode other than REC PAUSE. The unit returns to REC PAUSE
mode when automatic stop is activated.
• In normal recording mode, this setting is not available and auto stop is not activated.
0000
OFF
Determines whether or not to engage repeat play during playback.
0: Does not engage repeat play. Stops playback at the end of the last clip.
0001
ON
1: Engages repeat play. Continues playback from the beginning when reaching the end
of the last clip.
NOTE:
• Repeat play is not available when the PLAYLIST button is on and during TEXT MEMO
playback.
• If the P2 card is removed during repeat play, playback is suspended when playback
reaches the clip that is no longer exists.
• Even if you insert a P2 card during repeat play, additional clips are not played back
until you once stop repeat play and resume it.
0000
NiCd12
Sets the battery type.
0: Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V)
0001
NiCd13
1: Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V)
0002
NiCd14
2: Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V)
0003
S-LION
3: Settings for 1 pc. lithium-ion battery (BP-L90A) (NEAR: 11.0 V, END: 10.6 V)
0004
I-LION
4: Settings for 1 pc. lithium-ion battery (ENDURA80) (NEAR: 13.4 V, END: 10.6 V)
0005
TYPE-A
5: Battery specified by menu No. 181 TYPE-A NEAR item and No. 182 TYPE-A END item
0006
TYPE-B
6: Battery specified by menu No. 183 TYPE-B NEAR item and No. 184 TYPE-B END item
0000
10.6
Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
|
|
voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped.
0023
12.9
NOTE:
|
|
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
0044
15.0
when AC power is used.
• A setting that is smaller than END cannot be made.
0000
10.6
Specifies the voltage (in 0.1 V steps) when this unit will automatically power off because
|
|
the voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has
0018
12.4
dropped.
|
|
NOTE:
0034
14.0
A setting that is larger than NEAR cannot be made.
0000
10.6
Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
|
|
voltage of a TYPE-B battery selected in menu No. 180 BATTERY SEL item has dropped.
0023
12.9
NOTE:
|
|
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
0044
15.0
when AC power is used.
• A setting that is smaller than END cannot be made.
Settings and brief function description
Advertisement
Table of Contents
