Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
684
EDH(SD)
685
ESR MODE(SD)
688
CC REC
689
COMP MODE
690
UMID REC
691
UMID GEN
692
UMID POS
134
Setup: Item Settings
Setting
FR
SUPER
No.
DISP.
0000
OFF
59.94Hz
0001
ON
Specifies whether or not EDH is superimposed on SDI OUT signals.
0: Signals are not superimposed.
1: Signals are superimposed.
0000
OFF
59.94Hz
0001
AUTO
Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit.
0: ESR is forcibly set to off.
1: ESR is automatically turned on and off depending on operating mode.
0000
OFF
59.94Hz
0001
ON
Specifies whether or not the closed caption signal that is superimposed on the SD SDI
and analog composite input signals will be recorded.
0: Not recorded.
The EE output is also blanked.
1: A closed caption signal that is superimposed on an input signal is recorded.
NOTE:
• When 1394 is selected as the input signal, the closed caption signal superimposed
on the compressed input signal is recorded in its original form regardless of settings
in this menu.
0000
NORMAL
59.94Hz
0001
DARK
60-25Hz
Selects the compression method used during video recording.
0: Records using normal compression processing.
1: Records video suppressing compression video distortion that is generated by dark
areas that are about 10 IRE (70 mV) or less.
NOTE:
This setting is available in DVCPRO HD 720p mode recording.
0000
OFF
Specifies whether or not UMID data should be recorded.
0001
ON
0: UMID data is not recorded.
1: Recorded.
0000
INT
Specifies the generation method of UMID information that is recorded when menu No.
0001
EXT
690 UMID REC is set to on.
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal.
Newly created UMID information is recorded when not superimposed on an input
signal.
0000
BLANK
Specifies the line that superimposes UMID data.
0001
12L
NOTE:
:
:
• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502
0006
17L
VITCPOS-2.
:
:
• Holding down the SHIFT button and pressing the RESET button will not restore the
0008
19L
factory defaults.
• UMID data is output before recorded VANC data. To output VANC data, set UMID
POS to a line other than that which superimposed the data or select "BLANK."
• During playback of DVCPRO HD native clip, UMID becomes NO-INFO.
Settings and brief function description
50Hz
29.97Hz
25Hz
29.97Hz
only
only
50Hz
29.97Hz
59-23Hz
only
60-25Hz
only
60-24Hz
25Hz
Advertisement
Table of Contents
