Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual page 156

Memory card portable recorder/player
Hide thumbs Also See for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER:
Table of Contents

Advertisement

The following warning messages appear when an incorrect operation is attempted in the thumbnail play list screen.
Item
Message
CANNOT ACCESS!
WRITE PROTECTED! The P2 or SD memory card is write protected.
CARD FULL!
NO CARD!
CANNOT DELETE!
UNKNOWN
CONTENTS
FORMAT!
CANNOT FORMAT!
CANNOT REPAIR!
CANNOT
RE-CONNECT!
NO INPUT!
INVALID VALUE!
UNKNOWN DATA!
CANNOT REPAIR IN
SELECTION!
Thumbnails
NO SD CARD!
NO COPY TO SAME
CARD!
SAME CLIP IS
SELECTED!
USER CLIP NAME
MODIFIED!
TOO MANY CLIPS!
LACK OF REC
CAPACITY!
CANNOT CHANGE!
NOT SELECTED!
MISSING CLIP!
156
For Long and Trouble-Free Operation: Error Messages
Description
Data cannot be accessed because it is corrupted
or for other reasons.
The P2 or SD memory card is full.
No P2 or SD memory card is inserted.
Contents version mismatch prevents deletion.
Warning displayed to indicate contents version
mismatch.
P2 card problem prevents formatting.
Selected content cannot be repaired.
A clip that does not span multiple cannot be
reconnected.
No data is input.
Entered data was invalid.
The metadata character code is invalid.
Some of the selected clip could not be repaired.
No SD memory card is inserted.
A clip cannot be copied to the card storing the
original clip.
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Characters in the clip name had to be deleted in
adding the counter value.
Too many clips are selected.
There is not enough recording capacity left on the
card.
A thumbnail containing a grayed out text memo
that cannot be generated is not available for
editing.
An attempt was made to delete an unselected
clip.
All cards that contain the clip must be inserted to
allow attachment of markers.
Measure
Restore media and clips to normal state before
access.
Insert write-enabled media.
Insert media with sufficient capacity.
Insert compatible media.
Match devices and contents version.
Match devices and contents version.
Check P2 card.
Check selected content.
Check selected content.
Set after making input.
Enter data in a valid range.
Use UTF-8 for the metadata character code. Use the
viewer to enter correct characters.
Insert an SD memory card.
Copy the selected clip to a card that does not
contain the original clip.
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect
all identical copies from the selected clips.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name
are automatically deleted when the total exceeds
100 bytes.
Reduce the number of selected clips.
Insert a card with sufficient recording capacity.
Edit settings or content to enable thumbnail display.
Select the clip you want to delete.
Insert all cards that contain the clip.

Advertisement

Table of Contents
loading

Table of Contents