Basic - Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual

BASIC

This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12
and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other
displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock.
Item
FR SUPER
No. DISP.
001 LOCAL ENA
002 CTL DISP
003 REMAIN SEL
006 DISPLAY SEL
120
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 DIS Restricts the number of buttons on the key panel that are available when the REMOTE/
0001 STOP LOCAL switch is set to REMOTE.
0: No buttons are available.
0002 ENA
1: Only the STOP button is available.
2: All buttons are available.
0000 12h Switches the CTL counter display between 12 and 24-hour clock display.
±
0: 12-hour clock display
0001 24h
1: 24-hour clock display
0000 OFF Specifies whether to display the remaining time or total time via the VIDEO MON
0001 2L connector and via superimposed display of the LCD panel.
0002 1L 0: No display.
1: Displays remaining media time on the second line.
0003 R/TTL
2: Displays remaining media time on the first line.
3: Displays the remaining media time on the first line and total media time on the second
line.
NOTE:
• These functions are not displayed when "2L" is selected and "TIME" is set in setup
menu No. 006 DISPLAY SEL.
• Total tape time is not displayed when "R/TTL" is selected and "TIME" is set in setup
menu No. 006 DISPLAY SEL.
• When setup menu No. 041 LOOP REC is set to ON, the remaining time is indicated
on the second line when a setting other than OFF is selected.
• When setup menu No. 040 VFR REC is set to ON, the remaining time is indicated on
the second line when a setting other than OFF is selected.
• When setup menu No.693 GAMMA SEL is set to a value other than OFF, the remaining
time is indicated on the second line when a setting other than OFF is selected.
0000 TIME Specifies the output of the VIDEO MON connector or what is displayed in the
0001 T&STA
superimposed display of the LCD panel.
Here, "data" indicates the CTL/TC/UB value selected with the COUNTER button.
0002 T&S&M
0: Data only
0003 T&RT
1: Data and operating status
0004 T&YMD
2: Data, operating status and mode
0005 T&MDY
3: Data and REC TIME
0006 T&DMY
4: Data and REC DATE (year/ month/day)
0007 T&UB
5: Data and REC DATE (month/day/year)
0008 T&CTL
6: Data and REC DATE (day/month/year)
0009 T&T
7: Data and user bit
However, when UB is selected with the COUNTER button, the time code is indicated after
the user bit.
8: Data and CTL
However, when CTL is selected with the COUNTER button, the time code is indicated
after CTL data.
9: Data and time code
NOTE:
An error message appears in the superimposed display if a warning or error occurs
when T&S&M is selected.
* An underlined setting indicates an initial value.
Settings and brief function description