Thumbnail Screen Names And Functions - Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual

Thumbnail Screen Names and Functions

1.
Display status
Display status indicates the type of thumbnails
displayed on the screen.
ALL:
SAME FORMAT:
SELECT:
MARKER:
TEXT MEMO:
SLOTn:
PROPERTY:
P2/REMAIN:
P2/USED:
META DATA:
➝For details on how to change display, refer to
"Switching the Type of Information That is
Displayed" (page 45).
2.
Record mode
Indicates the record mode of the clip at the cursor
position.
3.
System format
Indicates the recording format of the clip at the cursor
position.
4.
Duration
Indicates the duration of the clip at the cursor position.
5.
USB host mode indicator
Appears in the USB host mode.
6.
Time display
Indicates the TC (time code) at the start of clip
recording, UB (user bit at the start of clip recording),
time of shooting, day of shooting, date and time of
shooting or the user clip name.
➝Refer to "Setting Items to Display" (page 46).
All clips
Clips with the same format
as the system
Clips selected with the SET
button
Clips with shot markers
Clips with text memo data
Clips on P2 card in slot No.
n
Detailed clip information
Media information (amount
of remaining space)
Media information (amount
of space used)
Set meta data
7.
Thumbnail
Indicates the initial frame of the clip that represents it.
8.
Clip no.
Indicates the numbers assigned to P2 card clips.
Numbers are assigned starting in order from the
earliest shooting date. Numbers of clips that cannot be
played back are shown in red.
M
9.
Shot mark indicator
Indicates that a shot mark has been attached to a clip.
P
10.
Proxy indicator
Indicates that a clip contains a proxy attached using
the AJ-SPX800, AJ-HPX2000/2100, AJ-HPX3000 or
other camera.
This unit cannot record proxies.
T
11.
Text memo indicator
Indicates a clip that contains text memo data.
E
12.
Edit copy indicator
Indicates an edit-copied clip.
W
13.
Wide indicator
Indicates a clip recorded in the 16:9 aspect ratio. This
is not indicated for an HD format clip.
!
14.
Incomplete clip indicator
Indicates a clip spanning multiple P2 cards where one
of the cards that contain part of the clip has not been
inserted.
X ?
15.
Bad clip Unknown clip indicator
Indicates a clip that became defective because the
power was shut down during recording or was
damaged for some other reason. Clips with the yellow
bad clip indicator can sometimes be repaired.
➝Refer to "Repairing Bad Clips" (page 54).
Clips with the red bad clip indicator cannot be repaired
and should be deleted. If deleting is not possible,
format the P2 card.
Clip Management: Thumbnail and Clip Management
43