Table of Contents
Advertisement
Item
FR
SUPER
FR
No.
DISP.
No.
0000
0001
0002
507
EXT TC SEL
0000
0001
0002
0003
508
BINARY GP
0004
0005
0006
0007
0000
0001
509
PHASE CORR
0000
0001
510
TCG CF FLAG
0000
0001
511
DF MODE
0000
0001
512
TC OUT REF
0000
0001
513
VITC OUT
0000
514
HD EMBD VITC
0001
0000
515
HD EMBD LTC
0001
Setting
SUPER
DISP.
EXT_L
59.94Hz
SLTC
Specifies the time code used when an external time code is used.
SVITC
0: LTC of the TIME CODE IN connector
1: LTC data attached to serial signal input to HD SDI IN
2: VITC data attached to serial signal input to HD SDI IN
NOTE:
When SLTC and SVITC are set, the VITC in the input video signal is used when an
analog composite or SD SDI input signal is selected. When 1394 is selected as the
input signal, the IEEE 1394 digital input signal time code is used regardless of this
setting.
000
Specifies user bit usage in time code generated by the TCG.
0: NOT SPECIFIED (character set not specified)
001
1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022)
010
2: UNASSIGNED 1 (undefined)
011
3: UNASSIGNED 2 (undefined)
100
4: UNASSIGNED 3 (undefined)
101
5: PAGE/LINE
110
6: UNASSIGNED 4 (undefined)
111
7: UNASSIGNED 5 (undefined)
OFF
59.94Hz
ON
Specifies whether or not LTC output from the TIME CODE OUT connector should be
phase controlled.
0: No phase control
1: Phase controlled
OFF
59.94Hz
ON
Sets the TCG CF flag.
0: OFF
1: ON
DF
59.94Hz
NDF
Sets the DF or NDF mode for CTL and TCG.
0: Uses drop frame mode.
1: Uses non-drop frame mode.
VOUT
59.94Hz
TC_IN
Specifies how the phase is switched for the time code output by the TIME CODE OUT
connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE
mode)
0: Synchronized with output video signal.
1: Synchronized with the external time code input.
SBC
Specifies how to output VITC that will be superimposed on the SD output video signal.
0: Outputs the time code recorded in the SBC area as VITC
VAUX
1: Outputs the time code recorded in the VAUX area as VITC
NOTE:
• VITC data detected in the input video signal is automatically recorded in the VAUX
area during video recording.
OFF
Specifies whether or not VITC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
OFF
Specifies whether or not LTC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
Settings and brief function description
only
50Hz
50Hz
only
50Hz
29.97Hz
25Hz
only
29.97Hz
only
50Hz
60-25Hz
only
Setup: Item Settings
129
Advertisement
Table of Contents
