Table of Contents
Advertisement
Item
FR
SUPER
FR
No.
DISP.
No.
For AJ-HPM110P
0000
0001
0002
776
REF LEVEL
For AJ-HPM110E
0000
0001
0002
0000
777
CH2 MIC PWR
0001
0000
0001
778
AUD OUT DLY
0000
0001
785
PB MIX
Subscreen
0000
01
PB CH1
0001
0002
0000
02
PB CH2
0001
0002
0000
03
PB CH3
0001
0002
0000
04
PB CH4
0001
0002
0000
0001
790
VOL SEL
0000
0001
0002
792
A DUB CH
0003
0004
0005
0000
0001
793
A DUB PB MIX
Setting
SUPER
DISP.
Specifies the standard level.
0: 20 dB
FS-20
1: 18 dB
FS-18
2: 12 dB
FS-12
FS-20
FS-18
FS-12
OFF
Turns on and off the CH2 microphone power supply.
ON
0: Does not use the microphone power supply.
1: Uses the jack switch to turn the microphone power supply on and off.
OFF
23.98Hz
ON
Determines whether or not the output timing of analog audio output (including
headphones and monitor output) is delayed to synchronize it with SDI output.
0: Not delayed
The output is synchronized with LCD panel and monitor output.
1: Delayed
The output is synchronized with SDI output.
NOTE:
LCD panel and video monitor output is output about 66 msec earlier than SDI output.
OFF
Sets a mix of analog and SDI audio output.
ON
NOTE:
Press the STOP or SET button to open a subscreen and select the channels used in
mixing audio output. To exit the subscreen, press the STOP or SET button again.
CH1
Specifies the playback channels that will be output via CH1.
CH1+2
CH1+3
CH2
Specifies the playback channels that will be output via CH2
CH1+2
CH2+4
CH3
Specifies the playback channels that will be output via CH3.
CH3+4
CH1+3
CH4
Specifies the playback channels that will be output via CH4.
CH3+4
CH2+4
CH1-4
Specifies operation of the recording level controls.
0: CH1 to CH4 only are variable, CH5 to CH8 are UNITY level.
CH1-8
1: In addition to CH1 to CH4, which are variable, CH5 to CH8 also become variable,
being linked to CH1 to CH4 operation.
CH1
Specifies tracks to be used for voice-overs.
CH2
CH3
CH4
CH1+2
CH3+4
OFF
Specifies whether or not the playback sound be mixed in the voice-over.
0: Playback sound is not mixed.
ON
1: The input and playback sound are mixed in the recording.
NOTE:
Press the STOP or SET button to open the subscreen to select the channels that will be
mixed. To exit the subscreen, press the STOP or SET button again.
Settings and brief function description
24Hz
59-23Hz
60-24Hz
only
Setup: Item Settings
137
Advertisement
Table of Contents
