Preparing To Use The 14U Library - Tandberg Data Storage Library T128 User Manual

Preparing to Use the 14U Library

1 Unpark the robot assembly.
a. Gently raise the robot assembly so that it no longer rests on the parking tab.
CAUTION
b. With your free hand, swivel the parking tab away from you until it is removed completely from
the interior of the module. When replaced correctly, the parking tab will not accidentally swivel
into the path of the robot.
c. Gently release the robot assembly. It will lower to the bottom module of the library.
2 Close the library's I/E station and access doors.
3 Add the tape drives to the modules. For details, see
page 148.
96
Support the robot assembly by holding onto the broad metal X-axis
plate. Lifting the robot by the thin metal rod will bend the rod.
Adding, Removing, and Replacing Tape Drives
Installing, Removing, and Replacing
on