Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003) - Ricoh 9100DN - Aficio SP B/W Laser Printer Software Manual

Select the [Yes] check box to configure the printer as default.
12. Specify whether or not to share the printer, and then click [Next >].
13. Specify whether or not to print a test page, and then click [Next >].
14. Click [Finish].
The printer driver installation starts.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
• A User Code can be set after the printer driver installation. For information about User Code, see the
printer driver Help.

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003)

• Installing this printer driver requires Administrators permission. Log on using an account that has Ad-
ministrators permission.
• In an IPv6 environment, you cannot use the LPR Port. Use the SmartDeviceMonitor port.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local Printer attached to this computer], and then click [Next >].
7. Click [Create a new port:].
8. Click [LPR Port] in [Create a new Port], and then click [Next >].
9. Enter the printer's IP address in the [Name or address of server providing lpd] box.
10. Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].
11. Check that the name of the printer whose driver you want to install is selected, and then click
[Next >].
Using the LPR Port
1
39