Bonjour(Rendezvous) - Ricoh 9100DN - Aficio SP B/W Laser Printer Software Manual

5. Monitoring and Configuring the Printer
ether
wlan
• If an interface is not selected, the current interface connection settings remain in effect.
• For details about AutoNet, refer to autonet parameters.

bonjour(rendezvous)

Use the "bonjour(rendezvous)" command to display bonjour(rendezvous)-related settings.
5
View settings
Bonjour settings are displayed.
msh> bonjour
Bonjour service name setting
You can specify the bonjour service name.
msh> bonjour cname "computer name"
• The computer name can be entered using up to 63 alphanumeric characters.
Bonjour Installation location information setting
You can enter information about the location where the printer is installed.
msh> bonjour location "location"
• Information about location can be entered using up to 32 alphanumeric characters.
Setting order of priority for each protocol
• diprint
msh> bonjour diprint [0-99]
• lpr
msh> bonjour lpr [0-99]
• ipp
msh> bonjour ipp [0-99]
You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher
priority.
IP TTL setting
194
Interface name Interface configured
Ethernet interface
IEEE 802.11b interface