Ricoh 9100DN - Aficio SP B/W Laser Printer Software Manual page 249

Message
Name registration success. WINS Server=<WINS
server address> NetBIOS Name=<NetBIOS
name>
Name registration success in Broadcast
name=<NetBIOS Name>
Name registration failed. name=<NetBIOS name> Name registration of <NetBIOSName> failed.
nbtd start.
nprinter start (Netware)
nwstart start. (NetWare)
Open log file <file name>
phy release file open failed.
Print queue <print queue name> cannot be serviced
by printer 0, <print server name>
Print server <print servername>has no printer.
print session full
Printer <printer name> has no queue
pserver start. (NetWare)
Required file server (<file servername>) not found
received EAP Failure
restarted.
Problem and solutions
Name registration of <NetBIOS Name> to <WINS
server address> was successful.
Name registration by Broadcast name of <Net-
BIOS Name> was successful.
Change to different NetBIOS name.
The nbtd service has started.
(In the remote printer mode) The NetWare service
has started.
The service for NetWare protocol stack setting has
started.
(In the print server mode) The specified log file has
been opened.
Replacing the network interface board is required.
Contact your sales or service representative.
(In the print server mode) The print queue cannot
be established. Make sure that print queue exists
on the specified file server.
(In the print server mode) The printer is not assigned
to the print server. Using NWadmin, assign the
printer, and then restart it.
No more print jobs can be accepted.
(In the print server mode) The print queue is not
assigned to the printer. Using NWadmin, assign the
print queue to the printer, and then restart it.
(In the print server mode) The NetWare service has
started.
The required file server is not found.
EAP reception failed.
The lpd service has started.
Message List
5
247