Smb; Snmp - Ricoh 9100DN - Aficio SP B/W Laser Printer Software Manual

5. Monitoring and Configuring the Printer
• You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and
Netware 6/6.5. Using the "slp" command, you can configure the value of TTL which can be used by
SLP multicast packet.
• The default value of TTL is 1. A search is executed only within a local segment. If the router does not
support multicast, the settings are not available even if the TTL value is increased.
• The acceptable TTL value is between 1 and 255.

smb

Use the "smb" command to configure or delete the computer or workgroup name for SMB.
Computer Name settings
msh> smb comp "computer name"
• Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be
5
entered.
Working Group Name settings
msh> smb group "work group name"
• Set workgroup name using up to 15 characters
Comment settings
msh> smb comment "comment"
• Set comment using up to 31 characters
Notify print job completion
msh> smb notif {on | off}
• To notify print job completion, specify "on". Otherwise, specify "off"
Deleting Computer Nam
msh> smb clear comp
Deleting Group Name
msh> smb clear group
Deleting Comment
msh> smb clear comment
View Protocol
msh> smb protocol

snmp

Use the "snmp" command to display and edit SNMP configuration settings such as the community name.
210