For Usb Interface Cable Users For Macintosh; Install The Printer Driver - Brother HL-2270DW Quick Setup Manual

USB

For USB Interface Cable Users for Macintosh

6
Before you install
IMPORTANT
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
a
Make sure your machine is plugged in and your
Macintosh is switched ON. You must be logged
on with Administrator rights.
b
Connect the USB cable to the USB connector
on the machine marked with the
and then connect the cable to your Macintosh.
IMPORTANT
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.
c
Make sure the machine power switch is on.
7
a
Put the installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
symbol, It may take a few minutes for installation to
complete.
c
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
d
When this screen appears, click Next.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
Finish
Macintosh

Install the printer driver

The installation is now
complete.
7